Introduction
Thank you for purchasing the IPC Machine Controller.
This manual contains information that is necessary to use the IPC Machine Controller. Please read
this manual and make sure you understand the functionality and performance of the Box PC before
attempting to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.
Part of the specifications and restrictions for the IPC Machine Controller are available in other man-
uals.
Refer to Relevant Manuals on page 2 and Related Manuals on page 32.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing Factory Automation systems.
• Personnel in charge of designing Factory Automation systems.
• Personnel in charge of installing and maintaining Factory Automation systems.
• Personnel in charge of managing Factory Automation systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3.
Applicable Products
This manual covers following Industrial Box PC with Machine Automation Control Software configura-
tions:
NY512-1500-1XX£13££X
NY512-1400-1XX£13££X
NY512-1300-1XX£13££X
Additional Information
Refer to 1-4 Product Configuration on page 1 - 6 for configuration details.
NY-series Industrial Box PC Hardware User's Manual (W556)
Introduction
1