Juniper ACX1000 Configuration Manual page 635

Meaning
Purpose
Action
Meaning
Copyright © 2017, Juniper Networks, Inc.
Validation State: unverified
Task: IS-IS
Announcement bits (3): 0-LDP 1-IS-IS 3-KRT
AS path: I
The output shows all the routes in the routing table of Device R1.
Verifying the IS-IS Routes
Display all the LDP backup routes in the IS-IS routing table of Device R1.
On Device R1, from operational mode, run the show isis route command to display the
routes in the IS-IS routing table.
user@R1> show isis route
IS-IS routing table
IPv4/IPv6 Routes
----------------
Prefix L Version
Backup Score
1.1.2.0/24 1
1.1.3.0/24 1
1.1.4.0/24 1
LDP->tp3-R4(10.255.102.156)
1.1.5.0/24 1
LDP->tp3-R4(10.255.102.156)
10.255.102.136/32 1
LDP->tp3-R4(10.255.102.156)
10.255.102.146/32 1
10.255.102.156/32 1
10.255.102.166/32 1
LDP->tp3-R4(10.255.102.156)
10.255.102.178/32 1
The output shows all the LDP backup routes in the IS-IS routing table of Device R1.
Chapter 18: Configuring Routing Protocols
Current version: L1: 558 L2: 564
Metric Type Interface
558 20 int lt-1/2/0.1
558 30 int lt-1/2/0.1
558 30 int lt-1/2/0.12
lt-1/2/0.1
558 20 int lt-1/2/0.12
lt-1/2/0.1
558 10 int lt-1/2/0.12
lt-1/2/0.1
558 20 int lt-1/2/0.1
558 30 int lt-1/2/0.1
lt-1/2/0.12
558 20 int lt-1/2/0.12
lt-1/2/0.1
558 10 int lt-1/2/0.1
NH Via
IPV4 tp3-R2
IPV4 tp3-R2
IPV4 tp3-R6
LSP
IPV4 tp3-R6
LSP
IPV4 tp3-R6
LSP
IPV4 tp3-R2
IPV4 tp3-R2
IPV4 tp3-R6
IPV4 tp3-R6
LSP
IPV4 tp3-R2
577