Juniper ACX1000 Configuration Manual page 577

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
To configure MCML on a link services IQ interface, you must specify how many multilink
classes should be negotiated when a link joins the bundle, and you must specify the
mapping of a forwarding class into an MCML class.
To specify how many multilink classes should be negotiated when a link joins the bundle,
include the
multilink-max-classes
multilink-max-classes
number;
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number]
[edit logical-systems logical-system-name interfaces interface-name
unit logical-unit-number]
The number of multilink classes can be 1 through 8. The number of multilink classes for
each forwarding class must not exceed the number of multilink classes to be negotiated.
NOTE:
In ACX Series routers, the multilink classes can be 1 through 4.
To specify the mapping of a forwarding class into a MCML class, include the
statement at the
[edit class-of-service fragmentation-maps map-name forwarding-class
hierarchy level:
class-name]
[edit class-of-service fragmentation-maps map-name forwarding-class class-name]
multilink-class
number;
The multilink class index number can be 0 through 7. The
statements are mutually exclusive.
no-fragmentation
NOTE:
In ACX Series routers, the multilink class index number can be 0
through 3. ACX Series routers do not support the
for fragmentation map.
To view the number of multilink classes negotiated, issue the
lsq-fpc/pic/port.logical-unit-number detail
Layer 2 Service Package Capabilities and Interfaces
Configuring LSQ Interfaces as NxT1 or NxE1 Bundles Using MLPPP
Configuring LSQ Interfaces for ATM2 IQ Interfaces Using MLPPP
Configuring LSQ Interfaces for T3 Links Configured for Compressed RTP over MLPPP
Link Services Configuration for Junos Interfaces
statement:
multilink-class
no-fragmentation
command.
Chapter 17: Configuring MLPPP
multilink-class
statement and
statement
show interfaces
519

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents