Upgrading To The Control Board-Routing Engine Remx2K-X8-64G In A Redundant Host Subsystem - Juniper MX2020 Hardware Manual

Routing Engine status:
Slot 1:
Current state
Election priority
Temperature
CPU temperature
DRAM
Memory utilization
CPU utilization:
User
Background
Kernel
Interrupt
Idle
Model
Serial ID
Start time
Uptime
Last reboot reason
Load averages:
For further description of the output from the command, see the
Command Reference.
RELATED DOCUMENTATION
MX2000 Host Subsystem CB-RE Description | 49
MX2000 Switch Fabric Board LED
Troubleshooting the MX2020 Host Subsystems | 681
Upgrading to the Control Board-Routing Engine REMX2K-X8-64G in a
Redundant Host Subsystem
A redundant host subsystem consists of a master Routing Engine-Control Board (CB-RE) (RE0) and a backup
CB-RE (RE1). To upgrade the host subsystem to use the REMX2K-X8-64G CB-RE, you must first uninstall
the backup CB-RE and install the REMX2K-X8-64G CB-RE, which then becomes the backup CB-RE.
Backup
Backup (default)
28 degrees C / 82 degrees F
26 degrees C / 78 degrees F
3313
22 percent
0 percent
0 percent
0 percent
0 percent
100 percent
RE-S-1800x4
9009099711
2012-11-30 15:56:39 PST
2 days, 17 hours, 56 minutes, 36 seconds
Router rebooted after a normal shutdown.
1 minute 5 minute
0.00
15 minute
0.00 0.00
Junos OS System Basics and Services
511