Table of Contents
Advertisement
3-14
Recalling a Saved Preset on the New Patient Screen
When a new patient is added to the system, you can assign a Preset to it by fol-
lowing these steps:
Press
.
PATIENT
1.
Click [
NEW PATIENT
2.
Add the patient data.
3.
Click [
].
PRESETS
4.
Highlight a Preset from the pull-down menu and press <
5.
Click [
]. The Preset is loaded when live imaging begins.
LOAD
6.
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging, the factory default Preset will be
loaded.
Renaming a User-Defined Preset
To change the name of an existing Preset, follow these steps:
Press the
key.
SETUP
1.
Highlight the Presets heading.
2.
Use the pull-down menu to select the Preset option to be renamed.
3.
Click [
].
RENAME
4.
Use the Trackball to place the cursor in the Presets text field and type a new
5.
name.
Click [
].
OK
6.
Removing a User-Defined Preset
To remove an existing Preset, follow these steps:
Press the
key.
SETUP
1.
Highlight the Presets heading.
2.
Use the pull-down menu to select the Preset option to be deleted.
3.
Click [
].
REMOVE
4.
NOTE If a Preset is removed (i.e., deleted) after [LOAD] is clicked and
before the start of live imaging, the factory default Preset will be
loaded.
ACUSON Cypress™ Operator's Manual
].
Basic Setup
> to select it.
ENTER
Advertisement
Chapters
Table of Contents
Troubleshooting
