Session - Cisco WLC 5700 Series Command Reference Manual

High Availability Commands

session

To access a specific stack member use the session command in privileged EXEC mode on the stack master.
session stack-member-number
Syntax Description
stack-member-number
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.2SE
Usage Guidelines
When you access the member, its member number is appended to the system prompt.
Use the session command from the master to access a member Controller
Use the session command with processor 1 from the master or a standalone switch to access the internal
controller. A standalone Controller is always member 1.
Examples This example shows how to access stack member 3:
Controller# session 3
Controller-3#
OL-32317-01
Stack member number to access from the .
Modification
This command was introduced.
High Availability Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
session
23