Toshiba e-STUDIO 2555C Service Manual page 1352

Sub
05/08 Mode Element
element
08 Setting Counter Paper Feeding retry counter Upper limit value
mode feeding
Item Subitem Code
6238
Sub- Default Acceptable
Details
code value value
PFP upper drawer 20 8 digits
115
RAM Contents
M When the number of feeding retry (08-6230 to 6235)
exceeds the setting value, the feeding retry will not be
performed subsequently. In case "0" is set as a setting
value, however, the feeding retry continues regardless
of the counter setting value.
* Feeding retry counter upper limit value
In this equipment, a toner image is formed on the
transfer belt prior to a paper feeding. When the feeding
retry occurs and the transport timing is delayed, the
toner image on the transfer belt is cleaned off without
the 2nd transfer since the paper cannot be reached for
the 2nd transfer process. After that, the toner image
formation is retried while the paper is waited. In this
case, the toner for this image formation is consumed
wastefully since the toner image on the transfer belt is
already cleaned off, even though the printing is normally
completed.
Therefore, note that the excessive toner will be
consumed consequently when the upper limit value of
feeding retry counter is set larger or set as "0" (no limit).
The toner is also consumed wastefully when the paper
misfeeding occurs. Replace the roller at earlier timing if
the paper misfeedings have occurred frequently.
Proce Servic
dure e UI
1