Toshiba e-STUDIO 2555C Service Manual page 1355

Sub
05/08 Mode Element
element
08 Setting Counter Paper Feeding retry counter Upper limit value
mode feeding
08 Setting Counter Paper
mode feeding
08 Setting Counter Paper
mode feeding
08 Setting Counter Paper
mode feeding
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
08 Setting Counter Toner Backup counter for
mode rotation time of toner
refill motor
Item Subitem Code
6241
6243
6244
6247
6249
6249
6249
Sub- Default Acceptable
Details
code value value
LCF 20 8 digits
Special paper 0 8 digits
Tab paper 0 8 digits
Envelope 0 8 digits
0 Y 0 8 digits
1 M 0 8 digits
2 C 0 8 digits
118
RAM Contents
M When the number of feeding retry (08-6230 to 6235)
exceeds the setting value, the feeding retry will not be
performed subsequently. In case "0" is set as a setting
value, however, the feeding retry continues regardless
of the counter setting value.
* Feeding retry counter upper limit value
In this equipment, a toner image is formed on the
transfer belt prior to a paper feeding. When the feeding
retry occurs and the transport timing is delayed, the
toner image on the transfer belt is cleaned off without
the 2nd transfer since the paper cannot be reached for
the 2nd transfer process. After that, the toner image
formation is retried while the paper is waited. In this
case, the toner for this image formation is consumed
wastefully since the toner image on the transfer belt is
already cleaned off, even though the printing is normally
completed.
Therefore, note that the excessive toner will be
consumed consequently when the upper limit value of
feeding retry counter is set larger or set as "0" (no limit).
The toner is also consumed wastefully when the paper
misfeeding occurs. Replace the roller at earlier timing if
the paper misfeedings have occurred frequently.
M Counts up when the registration sensor is ON in the
special paper mode.
M Counts up when the registration sensor is ON in the tab
paper mode.
M (Unit: Sheets)
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
M The rotation time of toner refill motor is stored when the
toner cartridge becomes empty.
Proce Servic
dure e UI
1
1
1
1
14
14
14