Replacement Of Pc Boards And Hdd - Toshiba e-studio200l Service Handbook

Hide thumbs Also See for e-studio200l:
Table of Contents

Advertisement

5.3

Replacement of PC Boards and HDD

When the HDD requires replacement, refer to  P. 5-118 "5.3.1 Replacing HDD".
When the SYS board requires replacement, refer to  P. 5-121 "5.3.2 Replacing SYS board".
5.3.1
Replacing HDD
<<CAUTION IN REPLACING HDD>>
When the HDD is replaced, it is necessary to back up the data in the HDD before replacing and to
recover them after replacing.
Notes:
1. To maintain the security, ask users to perform the backup/restore for users' data/information
in the HDD. The service technician can perform them only when users permit it.
2. Some data in the HDD cannot be backed up and can be kept only on the paper.
3. When 08-690 is performed, the HDD self-certificate is not available, so the SSL-related set-
ting becomes disabled. (e-STUDIO202L/203L/232/233/282/283)
The procedure for replacing the HDD is as follows.
[A] Ask users to back up the data in the HDD. See the following for the item of data, and the
possibility and the measure of the backup.
(1)
Image data in the Electronic Filing
Archive them in the "e-Filing" of TopAccess.
As for the backup in Box data, all data (selectable by the box) can be backed up / restored in one
go by using "e-Filing Backup/Restore Utility".
(2)
F-code information, Template registration information, Address book
Back them up in the "Administrator" menu of TopAccess.
(3)
Department management data
Export them in "Administrator" menu of TopAccess.
(4)
Log data (Print, Scan, FAX (Transmission / Reception))
Export them in the "Administrator" menu of TopAccess. (Import cannot be performed.)
(5)
Data in the shared folder (Scanned data, Saved data of copy / FAX transmission)
Copy them to the client computer via the network. (The data which have been copied to the client
computer cannot be copied to the shared folder.)
(6)
Print waiting data (Copying data and FAX reception data that are waiting to be printed due to the
paper run-out and jam, etc.)
Finish printing them after the paper supply and the jam release, etc. (The data cannot be kept.)
(7)
Print job (Private print data, Schedule print data)
If any job is left, print them. (The data cannot be backed up.)
(8)
FAX saved data (Confidential / Bulletin board data)
Print them. (The data cannot be backed up.)
(9)
Registration data for FAX transmission (Delayed transmission / Recovery transmission)
The data cannot be backed up.
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
TROUBLESHOOTING
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
5 - 118
07/11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents