Hard Disk (Hdd) - Toshiba e-STUDIO6520C Service Handbook

(3) Remove 2 harness clamps on the upper side
of the case. Release harness from 2 clamps
with a lock.
(4) Remove 4 screws and take off the PFC
board case.
Note:
The removed PFC board case can be
hooked on the equipment temporarily.
7.1.10

Hard disk (HDD)

(1) Take off the rear cover.
Service Manual "3.5.18 Rear cover"
(2) Disconnect 2 connectors.
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 7-23
PFC board case
Fig. 7-24
Fig. 7-25
REPLACEMENT OF PC BOARDS/HDD
7 - 9
e-STUDIO5520C/6520C/6530C
7