Wipe; Selecting The Wipe Pattern; Selecting The Wipe Direction; Setting The Border Width And Soft Effect - Panasonic AW-HS50E Operating Instructions Manual

1. Basic operations

1-2. Wipe

Wipe patterns or borders can be set for executing the
background transition.

1-2-1. Selecting the wipe pattern

[2] WIPE Menu
1. Pattern
The wipe pattern can be selected by turning the OSD/TIME
dial.
Wipe patterns and their numbers
1 2
6 7
11 12
  The wipe pattern can also be changed by turning the
OSD/TIME dial while pressing the WIPE button without
performing a menu operation.
3 4 5
8 9 10
13

1-2-2. Selecting the wipe direction

[2] WIPE Menu
2. Direction
This item is used to select the wipe direction.
N (Normal):
Wiping proceeds in the normal direction.
R (Reverse):
Wiping proceeds in the reverse direction.
N/R (Normal/Reverse):
The normal direction is replaced with the reverse
direction (or vice versa) when the transition is
completed.
A
B
A
B
1-2-3. Setting the border width and soft
effect
[2] WIPE Menu
3. Border/Soft
[B: Border]
This is used to set the border width for wiping.
Select "0.0" as the setting if no effects are to be added to the
borders.
[S: Soft]
This is used to set the amount of the soft effects.
This amount indicates the ratio of the soft effect to the
border width.
When only the soft effect is to be added to wipe, set B
(border) to "0.0".
7 (E)
N R
A B B A
B A A B
N/R
A B
A B