Teledyne API Model T360/T360M Operation Manual
3.5.5. Current Loop Analog Outputs (Option 41)
Figure 3-8:
07272B DCN6552
This option adds isolated, voltage-to-current conversion circuitry to the
analyzer's analog outputs. This option may be ordered separately for any of the
analog outputs; it can be installed at the factory or added later. Call TAPI sales
for pricing and availability.
The current loop option can be configured for any output range between 0 and
20 mA. Figure 3-8 provides installation instructions and illustrates a sample
combination of one current output and two voltage outputs configuration.
Information on calibrating or adjusting these outputs can be found in Section
4.13.4.3.
Current Loop Option Installed on the Motherboard
Getting Started
39