Optional Hardware And Software; Rack Mount Kits (Options 20A, 20B & 21); Current Loop Analog Outputs (Option 41); Figure 5-1: Current Loop Option Installed On The Motherboard - Teledyne 100E Instruction Manual

Model 100E Instruction Manual

5. OPTIONAL HARDWARE AND SOFTWARE

This section includes a descriptions of the hardware and software options available for
the Model 100E UV Fluorescence SO
please contact the sales department of Teledyne - Advanced Pollution Instruments at:
5.1. Rack Mount Kits (Options 20a, 20b & 21)
There are several options for mounting the analyzer in standard 19" racks.
Option Number
OPT 20A
OPT 20B
OPT 21

5.2. Current Loop Analog Outputs (Option 41)

This option adds isolated, voltage-to-current conversion circuitry to the analyzer's analog
outputs. This option may be ordered separately for any of the analog outputs, it can be
installed at the factory or added later. Call T-API sales for pricing and availability.
The current loop option can be configured for any output range between 0 and 20 mA.
Information on calibrating or adjusting these outputs can be found in Section 6.7.4.5.
Figure 5-1:
045150102 Rev XB1
Analyzer. For assistance with ordering these options
2
TOLL-FREE: 800-324-5190
TEL: +1 858-657-9800
FAX: +1 858-657-9816
E-MAIL: apisales@teledyne.com
WEB SITE: http://www.teledyne-api.com/
Rack mount brackets with 26 in. chassis slides.
Rack mount brackets with 24 in. chassis slides.
Rack mount brackets only
Current Loop Option Installed on the Motherboard
Optional Hardware and Software
Description
47