Figure 6-6: Comm - Change Hostname; Table 6-4: Hostname Editing Button Functions - Teledyne t100 Operation Manual

Communications Setup and Operation
6.5.2.1. CHANGING THE ANALYZER'S HOSTNAME
COMMUNICATIONS MENU
SETUP X.X
ID INET COM1 COM2
SAMPLE ENTER SETUP PASS : 818
8 1 8
Continue pressing SET> UNTIL ...

Table 6-4: Hostname Editing Button Functions

Button
<CH
CH>
INS
DEL
[?]
ENTR
EXIT
Buttons only appear when applicable.
136
The HOSTNAME is the name by which the analyzer appears on your network. The
typical default name for all Teledyne API's T100 analyzers is 100 but could be 0. To
change this name (particularly if you have more than one T100 analyzer on your
network), access the COMMUNICATIONS Menu (refer to Figure 5-13), then press:
EXIT
Table 5-3) to edit HOSTNAME
ENTR EXIT
SETUP X.X INITIALIZATI0N SUCCEEDED
SETUP X.X
ID
Figure 6-6: COMM – Change Hostname
Moves the cursor one character to the left.
Moves the cursor one character to the right.
Inserts a character before the cursor location.
Deletes a character at the cursor location.
Press this button to cycle through the range of numerals and characters
available for insertion.:
0-9, A-Z, space ' ~ !  # $ % ^ & * ( ) - _ = +[ ] { } < >\ | ; : , . / ?
Accepts the new setting and returns to the previous menu.
Ignores the new setting and returns to the previous menu.
Teledyne API - T100 UV Fluorescence SO
HOSTNAME: T100
SETUP X.X
<SET EDIT
HOSTNAME: T100
SETUP X.X
<CH CH> INS DEL [?]
Use these buttons (See
HOSTNAME: T100-FIELD1
SETUP X.X
<SET EDIT
SETUP X.X INITIALIZING INET
...
INITIALIZING INET 100%
SETUP X.X
COMMUNICATIONS MENU
INET COM1 COM2
Function
EXIT
ENTR EXIT
EXIT
0%
INITIALIZATION FAILED
Contact your IT Network
Administrator
EXIT
06807F DCN7335
Analyzer
2