Last Number Redial; Call Forwarding - All Calls - NEC DT330 User Manual

OVERRIDE
4:26 PM TUE 13 APR 2004
MIC
Note: Override may be programmed by the Telephony
Server Admin. for one of the Programmable fea-
ture keys, or may be programmed by the user on
a One-Touch Speed Calling key by storing the
Recall and Override access code.

LAST NUMBER REDIAL

To Recall Last Number Dialed
Press key. Last number dialed is displayed.
Redial
LNR[# or
Press key until desired number is dis-
Redial
played. Up to 5 previously dialed numbers.
Press # or . The number on the display is auto-
matically redialed.
When party has answered, lift handset or speak
hands-free.
Note: A-law Countries [Australia, Russia, Latin Amer-
ica, UK, Middle near East, other Asian nations]:
#
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:
2001
>>>
DT330/310
]/SPD[_ _] ‚Ä
XXXXXX

CALL FORWARDING - ALL CALLS

DT330/310
To Set
Press Speaker key. Receive dial tone.
If setting for another station, press MULTILINE
APPEARANCE.
Press FWD or dial "Call Forwarding – All Calls"
access code. Receive special dial tone.
Dial destination station or external telephone num-
ber. Receive service set tone.
FWD LED lights (at your station or at the DT Series
of the multiline station you are setting).
Press Speaker key. Call Forwarding – All Calls is
set.
FORWARD SET
4:26 PM
Using Soft Key
Press FDA Soft Key. Receive special tone.
Dial destination; wait for service set tone.
"FORWARD SET" is displayed, call forwarding for
all calls is set.
FORWARD SET
4:26 PM
MIC
55
Forwarding
station
2000
TUE 13 APR 2004
TUE 13 APR 2004
>>>