<vlan-id> mrpt
ipv6 mld snooping vlan <vlan-id>
query-interval <value>
no
ipv6
mld
snooping
<vlan-id> query-interval
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no
ipv6
mld
snooping
<vlan-id> immediate-leave
ipv6 mld snooping vlan <vlan-id>
query-mrsp <value>
no
ipv6
mld
snooping
<vlan-id> query-mrsp
ipv6 mld snooping vlan <vlan-id>
query-robustness <value>
no
ipv6
mld
snooping
<vlan-id> query-robustness
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no
ipv6
mld
snooping
<vlan-id> suppression-query-time
21.4.3 Commands For MLD Snooping Configuration
21.4.3.1 debug mld snooping all/packet/event/timer/mfc
Command: debug mld snooping all/packet/event/timer/mfc
no debug mld snooping all/packet/event/timer/mfc
Function: Enable the debugging of the switch MLD Snooping; the "no" form of this
command disables the debugging.
Command Mode: Admin Mode
Default: The MLD Snooping Debugging of the switch is disabled by default
Usage Guide: This command is used for enabling the switch MLD Snooping debugging,
which displays the MLD data packet message processed by the switch——packet, event
messages——event,timer messages——timer,messages of down streamed hardware
entry——mfc,all debug messages——all.
Configure the query interval. The "no" form of
this command restores to the default.
vlan
Configure immediate leave multicast group
function for the MLD Snooping of specify vlan.
The "no" form of this command cancels the
vlan
immediate leave configuration.
Configure the query maximum response period.
The "no" form of this command restores to the
default.
vlan
Configure the query robustness, the "no" form of
this command restores to the default.
vlan
Configure the suppression query time. The "no"
form of this command restores to the default
vlan
782