Web Management; Snmp/Ntp Server Configuration; Request Interval Configuration; Time Difference - Edge-Core ES4626 User Manual

respectively, and SNTP/NTP server function (such as NTP master) is enabled, then
configurations for any ES4626/ES4650 switch should like the following:
Switch#config
Switch (Config)#sntp server 10.1.1.1
Switch (Config)#sntp server 20.1.1.1
From now on, SNTP would perform time synchronization to the server according to the
default setting (polltime 64s, version 1).

14.4 Web Management

Click "SNTP configuration" to open the switch SNTP configuration management list.
Users may then make configuration to switch's SNTP settings.

14.4.1 SNMP/NTP server configuration

Click "SNTP configuration", "SNTP/NTP server configuration" to configure SNTP/NTP
server address and server version.
Example: Configure Server address as 10.1.1.1, configure version as 4, and then, Click
Apply button to apply the configuration to switch.

14.4.2 Request interval configuration

Click "SNTP configuration", "Request interval configuration" to configure the sending
request time interval from SNTP client to NTP/SNTP server.
Example: Configure Interval as 128 minutes, Click Apply to set the configuration in the
switch.

14.4.3 Time difference

Click "SNTP configuration", "Time difference" to configure the SNTP client time zone
and UTC time difference.
Time zone-configures time zone
385