Table of Contents
Advertisement
Chapter 2 Useful Features
2.
RAID System Configuration
Use HPE Smart Array S100i Software RAID Configuration Utility to configure RAID, such as creating virtual
drives and make a hot spare. Refer to following sections for detail of its operation. You can also configure RAID
by Smart Storage Administrator. Refer to a document for detail that Smart Storage Administrator User's Guide
which is uploaded on the following ftp site.
http://www.nec.com/express/
Tips
2.1
Start HPE Smart Array S100i Utility
Use the System Utilities to start the HPE Smart Array S100i Utility.
Step1
Turn on the server and wait for POST to proceed.
After a while, the following message appears at the bottom left of the screen.
F9
System Utilities
If you press the < F9> key, SETUP starts upon completion of POST and the System Utilities menu is displayed.
The screen image used in this chapter is an example and may not be the same as
your server.
The menu may be changed depending on the firmware and BIOS version. The menu
may be changed based on the firmware and BIOS version. The content of each
menu item can be viewed by selecting the item with pressing F1 Help key.
Tips
Please note that the white color background of F9 means the function is selected, if it's not
turn to white color after you pressed the button, wait for a moment of system initialization.
Express5800/R120h-1M, R120h-2M (2nd-Gen) Maintenance Guide
2. RAID System Configuration
77
Advertisement
Table of Contents
