Table of Contents
Advertisement
Enable rapid equilibration – select this option to
equilibrate the column at a high flow rate.
Note
Due to the high pressure that is possible during rapid equilibration,
this option may not be desirable for some column media or
purification methods.
3.10.7 Restart the system
Some configuration settings do not take effect until the system
is restarted. After completing sections 3.10.1 through 3.10.6
restart the system:
1. If the Configuration window is not closed already, click the
OK button to close it.
2. Place the Power switch below the LCD display in the Off
position and wait one minute or more.
Always wait at least one minute after placing the Power switch in
the Off position. Moving the switch to the Off position begins a
power down sequence that takes up to one minute to complete. If
you move the switch to the ON position before the sequence is
complete, the system may not start up correctly.
Except during an emergency, never remove AC power
immediately after placing the Power switch in the Off position. The
power down sequence includes file maintenance that takes up to
one minute to complete. Interrupting the file maintenance may
corrupt files causing abnormal operation or a complete system
failure.
3. After one minute or more, place the Power switch in the On
position.
4. The system is ready for operation when the PeakTrak
screen is displayed.
Section 3 Preparation: Rf 150 Systems
CAUTION
CAUTION
3-17
Advertisement
Table of Contents
