Table of Contents
Advertisement
CombiFlash NextGen Systems
Section 2 Preparation
Figure 2-20 User Management guide
2.13.4 Restart the System
2.14 Prime the Solvent
Lines
2-22
Some configuration settings do not take effect until the system is
restarted. After completing the configuration, restart the system:
1. If the C
ONFIGURATION
the O
button to close it.
K
2. Momentarily press the power switch on the side of the
instrument and wait for the system to shut down.
Except during an emergency, never remove AC power immedi-
ately after placing the power switch in the O
power down sequence includes file maintenance that takes up
to one minute to complete. Interrupting the file maintenance
may corrupt files causing abnormal operation or a complete
system failure.
3. After one minute or more, press the power switch.
4. The system is ready for operation when the PeakTrak
screen is displayed.
Before the first use, the system should be primed. Ensure that
the solvent containers are filled, then (NextGen 300 or 300+):
1. Select the T
OOLS
ically primes each line with 50 mL of solvent in the order
directed by the user, as shown in Figure 2-20. You can also
rename your solvents by using this screen to switch sol-
vents. These changes are also reflected in the configuration
menu.
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
window is not closed already, click
CAUTION
> A
P
menu command. Automat-
UTO
RIME
position. The
FF
Advertisement
Table of Contents
