Teledyne CombiFlash Rf User Manual page 93

+
CombiFlash® Rf User Manual
Figure 4-5 Preparing a bulkhead fitting connection
b. Connect the other end of the black tubing to the Rf 4x
port labeled "From Rf " (in the block labeled "Column
Waste"). Finger-tighten the threaded fitting.
4. Locate the 20 inch (50 cm) length of natural tubing from
the accessory package. Using nuts (60-0923-015) and
ferrules (60-0923-017), connect this tubing between the
CombiFlash Rf system's Level Sense port and the Rf 4x
module's Waste Level Sense From Rf port.
Waste Solvent
Figure 4-6 CombiFlash Rf system to Rf 4x waste tubing connections
(all other connections not shown)
4-8
Level Sense
(air)