Table of Contents
Advertisement
DECLARATION OF CONFORMITY
Application of Council Directive:
Manufacturer's Name:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
Standard
Description
EN61000-4-2:
Electrostatic Discharge
2009
EN61000-4-3:
Radiated RF Immunity
2010
EN61000-4-4:
Electrical Fast Transient on Mains
2010
and I/O
EN61000-4-5:
Surge on AC Lines
2005
EN61000-4-6:
Conducted RF on AC Mains and
2008
I/O
EN61000-4-11:
Voltage Dips/Short Interruptions
2004
CISPR11/
RF Emissions Radiated, below
EN 55011: 2009
1GHz and Conducted, AC Mains
EN61000-3-2:
AC Harmonic, Flicker
2009, 3-3: 2008
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of May 26, 2015.
USA Representative
____________________
Vikas V. Padhye Ph. D.
Executive Vice President
Teledyne Isco.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-0318
60-5232-255
Rev B
2004/108/EEC
2006/95/EEC
The Low Voltage Directive
2012/19/EC
WEEE Directive
Teledyne Isco
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
RF+, RF+ Lumen, and RF+ PurIon, RF+ PurIon S, RF+ PurIon L, EZ Prep
Year of Issue:
2015
EN 61326-1:2006 EMC Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
EN 61010-1:2010 Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 2.7GHz 80% AM at 1kHz
Level 1 - 10V/m
Level 2 - 2kV on ac lines
2kV common mode, 1kV differential mode
150 kHz to 80 MHz, 3V rms, 80% modulated
0% during 1 cycle and full cycle
70% at 25 cycles
Group 1, Class A Industrial, Scientific, and
Medical Equipment
The EMC Directive
Severity Applied
Performance Criteria
A
A
A
A
A
A
A
PASS
PASS
Advertisement
Table of Contents
