Teledyne CombiFlash Rf User Manual page 97

+
CombiFlash® Rf User Manual
To Waste
Bottle 2
Figure 4-10 Valve Waste Out routed to Channel 2
Note
When using higher-density solvents such as dichloromethane
(DCM), ensure that waste containers are no more than 3 feet
below the supply solvent levels. Placing solvent containers above
the system and waste containers on the floor may cause the
internal check valves to open and allow solvent to flow through the
system when in the standby state.
Note
The Rf 4x back panel ports labeled A and B are not used.
4-12