Teledyne CombiFlash Rf User Manual page 191

+
CombiFlash® Rf User Manual
Note
The following steps change the local area connection settings. If
the PC must be restored to its original network configuration,
record the present Internet Protocol (TCP/IP) settings now.
5. Select the "Use the following IP address" option.
6. Enter the IP address "192.168.1.200".
7. Enter the Subnet Mask, "255.255.255.0."
8. Click the OK button to close the Internet Protocol Version 4
(TCP/IPv4) Properties window. Click the OK button to close
the Local Area Connection properties window.
9. Shut down the PC and place the CombiFlash Rf system in
Standby.
Figure 7-1 Local Area Connection Properties
7-6