Network Pc Access - Teledyne CombiFlash Rf User Manual

+
CombiFlash® Rf User Manual
Note
Should your network administrator request the MAC address, a
label on the system's back panel lists the Address. You also can
find the MAC Address on the Help>About PeakTrak window.
5. Click the OK button to save the settings.
6. Confirm that your network administrator has completed
any necessary network changes to support the system.
7. Locate the CAT5 connection cable (P/N 480-6545-01) in the
accessory package. Insert one end into the Ethernet port on
the back panel. Connect the other end of the cable to your
network access port.
You should be able to connect to the CombiFlash Rf from a PC
on the network (Section 7.1.1) and configure other network
features such as network printing (Section 7.1.2) and network
file saving (Section 7.1.3). Networks with Wi-Fi access points
may also support remote control with mobile digital devices
(Section 7.1.4).

7.1.1 Network PC Access

A successfully networked CombiFlash Rf system can be
accessed by a PC that meets the recommendations listed in
Table 7-1.
Table 7-1 Personal Computer Recommendations
Operating Systems:
Hardware:
Network Protocol:
Network Connection:
Display:
Internet Browser:
a. This table shows supported PC configurations. Other configurations or
AJAX-compatible browsers may be possible but are unsupported by Tele-
dyne Isco.
7-2
Microsoft Windows 2000, XP, Vista, or Windows 7
The computer hardware must meet the minimum
required specifications of the selected operating
system.
TCP/IP
IEEE 802.3 (Ethernet)
800 x 600 pixels, 256 colors, minimum
Last two versions of Microsoft Internet Explorer
a