Teledyne CombiFlash Rf User Manual page 130

6.2.4.4 Edit Defaults
Choose this command to open the M
window from which you can modify the default method files.
To prevent tampering with the default column programs,
access to this function can be password protected using the
S A
ET DMINISTRATOR
See Also: E
DITING A
6.2.4.5 Configuration
Choose this command to open the C
window. From this window you specify the solvents used with
the system, set default volumes for collection tubes, set the
system date and time, configure network settings, etc.
6.2.4.6 Set Administrator Password
Choose this command to open the S
P
ASSWORD [6.3.14]
Passwords protect unauthorized modifications to:
• Default methods
• User management
• system date and time
• system password
Before any of the above can be accessed, the user must enter a
password. Password protection for the default methods can be
disabled so all users can modify default methods.
6.2.4.7 User Management
Choose this command to open the U
window. Use this window to add or remove users from the
system. This feature allows you to create a working folder on
the system for each user. Use the F
command to select your folder.
[6.2.1.4]
To prevent unauthorized changes to user management, this
function is password protected.
6.2.4.8 Calibrate Touchscreen
Choose this command from the touch screen to calibrate the
interaction between touch screen display elements and stylus
location.
P
ASSWORD [6.2.4.6]
D M
EFAULT ETHOD [6.4.4]
window.
Section 6 User Help Reference
E
ETHOD DITOR [6.3.2]
menu command.
.
ONFIGURATION [6.3.13]
A
ET DMINISTRATOR
M
SER ANAGEMENT [6.3.15]
>S D P
ILE ET ATA
...
ATH
6-9