Teledyne CombiFlash Rf User Manual page 11

Section 1 Introduction
+
Figure 1-2 CombiFlash Rf system, 1–200 mL/min, 200 psi (with
automatic injection valve)
+
CombiFlash Rf – For more advanced needs, the Combi-
+
Flash Rf is a 1–200 mL/min (delivery flow rate), 200 psi
system that forms a binary gradient by automatically
selecting two solvents from four inlets. This configuration
has an automatic, self-cleaning injection valve for sample
introduction, and full-spectrum UV (200–400 nm) or
UV-vis (200–800 nm) detection with secondary wavelength
monitoring. An internal air pump is used for post-run col-
umn air purging, active solvent level sensing, and waste
full bottle detection.
1-3