Method Editor - Teledyne CombiFlash Rf User Manual

6.2.1.13 Logout
Choose this command to logout of the system. After logging
out, the system displays a login screen and waits for the next
user to log in.

6.2.2 Method Editor

Selecting the Method Editor menu command will open the
M
ETHOD
modify the advanced method file settings.
6.2.3 MS
This menu item is only available in PurIon systems to control
the mass spectrometer. The following options are available:
6.2.3.1 Method Development
Choose this command to open the MS M
window to verify ionization conditions for the compounds
[6.3.8]
to be purified. This command is not available from a remotely
connected computer via a web browser.
ION FINDER - Enables the user to find fragments and
adducts based on the molecular weight of their desired
compound.
• DESIRED MASS - enter the molecular weight of your
compound, rounded to the nearest integer.
• DETECTION IONS - list of ions to be detected.
• Detection Ion - list of possible adducts or fragments
based on the value entered in the desired mass control
and detected by the system. Checking one of these
values adds it to the DETECTED IONS list.
6.2.3.2 Manual Control
Use this command to open the MS M
window to prime and control the carrier solvent pump and
switching valve on the mass spectrometer fluid interface. This
command is not available from a remotely connected computer
via a web browser.
6.2.3.3 Ionization settings
This command opens the I
to allow creation of custom ionization parameters that can be
saved for various compound classes and projects. This
E window. Use this window to view and
DITOR [6.3.2]
Section 6 User Help Reference
ETHOD
ANUAL
S
ONIZATION ETTINGS [6.3.10]
D
EVELOPMENT
C
ONTROL [6.3.9]
window
6-7