Table of Contents
Advertisement
+
CombiFlash® Rf
User Manual
1.3 Operating Overview
The CombiFlash Rf system is equipped with a touch screen
display for local control.
The system supports TCP/IP communication. This allows
direct control of the system by a Windows computer via a
cross-over cable between Ethernet ports of the CombiFlash Rf
system and the computer. The Windows computer must have
Microsoft Internet Explorer 6 or newer.
TCP/IP communication also allows remote control of the
system via an established network. Remote controlling devices
on the network can be a Windows PC or an Apple mobile
digital device (iPod Touch, iPhone, and iPad).
Note
Teledyne Isco recommends that you obtain assistance from your
Information Technology department before attempting direct or
network connections.
1.3.1 Multiple Control Possibilities
The system can be accessed from the built-in touch panel and
up to ten network devices. The touch panel shares control with
all connected devices. The system performs the most recent
command from any control input.
1.3.2 File Storage
To support operation from a variety of direct and network
connections, the software and all files are stored in the
CombiFlash Rf on an internal hard drive. This ensures that
your compound purification methods and run history files can
be viewed from any connection. Optionally, run files may be
saved to a USB flash drive, a networked controlling computer
or a network drive.
1-8
Advertisement
Table of Contents
