Apple Mobile Digital Devices; Install And Configure The Peaktrak App; Direct Connection - Teledyne CombiFlash Rf User Manual

+
CombiFlash® Rf User Manual

7.1.4 Apple Mobile Digital Devices

You can wirelessly monitor and control CombiFlash Rf 75, Rf
+
Rf Lumen and CombiFlash Torrent systems using the
PeakTrak app, which is available for download from the App
Store. The app is designed for a mobile digital device (iPod
Touch, iPhone, and iPads) running iOS 4.2 or later and is
compatible with CombiFlash systems running PeakTrak
version 2.1.15 or greater.
Note
Remote communication requires the CombiFlash Rf system and
mobile digital device to share a common network with Wi-Fi
access in the remote location. Refer to the Remote Interfaces
section in the system's user manual for details on network
configuration.

7.1.5 Install and Configure the PeakTrak App

1. From the Apple mobile digital device, visit the App Store
and locate the "PeakTrak" app by Teledyne Isco.
Note
The App Store requires an Internet connection on the Apple
mobile digital device.
2. Install the app on the Apple mobile digital device.
3. Open the PeakTrak app.
4. From the PeakTrak display, tap the "+" button.
5. Enter a descriptive name for the CombiFlash system.
6. Enter the address for the CombiFlash system. The
assigned address from the system's touch panel display can
be located using the Help>About PeakTrak menu
command.
7. Tap the Connect button to save the information and
connect to the system. Or tap the Save button to save the
information and enter additional systems.

7.2 Direct Connection

A direct connection supports communication between the
CombiFlash Rf system and a single PC that meets the
recommendations in Table 7-1.
7-4
+
,