Table of Contents
Advertisement
To load the racks:
1. Insert test tubes, vials, or bottles into the rack (Fig. 3-6).
Figure 3-6 Loading test tubes
Risk of broken glass or equipment damage. Do not load test tubes
longer than the length listed on the rack label.
2. While holding the rack with the rack label visible (Figure
3-7), insert the racks into the system. Slide the rack in
until you feel it drop into its seated position.
Figure 3-7 Inserting the collection tube rack
Section 3 Preparation: Rf 150 Systems
CAUTION
Rack
Label
3-11
Advertisement
Table of Contents
