Preparation; Rf + , Rf + Lumen, Rf+ Purion, And Ez Prep Systems; Unpacking The Unit - Teledyne CombiFlash Rf User Manual

Rf + , Rf + Lumen, Rf + PurIon, and
This section provides instructions for unpacking and installing
the CombiFlash Rf
systems. The Rf
installation of the PurIon Mass Spectrometer. The EZ Prep
system comes with the tubing connections completed and
therefore the tubing will be covered in Section 2.6 . To prepare a
system for operation, sequentially follow all instructions in
sections 2.1 through 2.14.
Note
CombiFlash Rf
manual. Instead, refer to instruction sheet 60-5233-638 for the
installation procedures.
Note
Section 2.16 contains an Installation Qualification checklist. If
required, sign off the checklist entries as you successfully
complete the following sections.

2.1 Unpacking the Unit

The CombiFlash Rf
single carton. The optional 4x expansion module is shipped in
a second carton. Carefully unpack the shipment and inspect
the contents.
The system is heavy. Use a two-person lift to prevent injury.
CombiFlash
Section 2 Preparation:
+ +
, Rf Lumen, Rf
+
PurIon has supplementary instructions for
+
PurIon system installation is not covered by this
+ +
or Rf Lumen system is shipped in a
WARNING
User Manual
EZ Prep Systems
+
PurIon, and EZ Prep
+
® Rf
2-1