Set Data Path - Teledyne CombiFlash Rf User Manual

+
CombiFlash® Rf User Manual
• File Type — This option is shown when you can limit
the display to certain types of files. Select the desired file
type from the list.
• File Name — This text entry box is used to identify the
currently selected (highlighted) file or folder when
browsing and opening files. When using a Save As
command, use this box to name the file.
• Open/Save — This button performs the listed action.
• Continue Last Run on Detected Column — (Rf+ and
Rf+ Lumen) This option appears when using the
F
ILE
system reads the RFID tag on the RediSep Rf column,
loads the previous method and adds a run extension. You
can then modify the method and click Play to continue
the run, skipping the equilibration and injection. This
feature can be useful if the run was interrupted or if
additional compounds of interest might be left on the
column.
• Load Previous Run from Detected Rack — (Rf+ and
Rf+ Lumen) This option appears when using the
F
ILE
system reads the RFID tag on a single rack and displays
the R
a need to recall run results at a later time.
• Cancel — Click the Cancel button to close the window
without saving or opening the file.

6.3.7 Set Data Path

The F
ILE
Set Data Path window. Use this window to select a default
folder for the current user. After selecting a folder, file
operations such as saving or opening files will use this selected
directory.
The Set Data Path primarily is used with the U
M
ANAGEMENT [6.3.15]
automatically create a folder for each user. When using the
system, set the data path to your folder or a subfolder within.
Each user has a different data path.
The window contains the following controls:
6-28
>O command. If you click this option, the
PEN [6.2.1.2]
>O command. If you click this option, the
PEN [6.2.1.2]
F . This feature is useful when there is
UN ILE [6.1.3]
>S D P
ET ATA ATH
feature. User Management will
... menu command opens the
[6.2.1.4]
SER