Table of Contents
Advertisement
The "Static IP" option will require an IP address, Net
mask, and Gateway provided by you network
administrator. The DHCP option will request these
parameters when the CombiFlash system is rebooted.
• IP Address — Enter the static IP Address for the
system. Static IP option only.
• Netmask — Enter the Netmask for the system. Static
IP option only.
• Gateway — Enter the Gateway for the system. Static
IP option only.
Network Printing The system can print to a network printer
and supports JetDirect and line printer (LPR) queues.
Consult with your network administrator to determine:
• The IP address of selected printer.
• If the printer uses an LPR print queue, you must also
find out the queue name.
• If the printer uses a JetDirect print queue, also ask
for the port number.
• The printer type: either Postscript or PCL.
When this information is known, you can proceed with
configuring system for network printing.
Follow the on-screen instructions for entering the address,
queue, and printer type information. After successfully
printing a test page, the network printer will be available for
printing using the F
the A
UTOMATICALLY
The Network printing controls may also be configured to print
to a local USB printer connected the system's back panel USB
port. The printer must support postscript printing. To
configure the local printer, select Postscript for the Printer
Type. Then, type the following connection URL:
"usb:/dev/usb/lp0".
Network File Save Configuration When configured, this feature
allows the system to access a network directory from which it
can save run files as PDF, text, or run monitor. To enable this
feature, select a file type to be saved and enter the remaining
>P
...
ILE
RINT
[6.2.1.12]
P
R
RINT
EPORT AT
Section 6 User Help Reference
menu command and
E
R
feature.
ND OF
UN
6-39
Advertisement
Table of Contents
