Teledyne CombiFlash Rf User Manual page 67

+
CombiFlash® Rf User Manual
If there is any damage to the shipping carton or any
components, contact the shipping agent and Teledyne Isco (or
its authorized representative) immediately.
If there is any evidence that the system has been damaged in
shipping, do not plug it into AC power. Contact Teledyne Isco
or its authorized representative for advice.
Compare the contents of the box with the enclosed packing
slips. If there are any shortages, contact Teledyne Isco
immediately.
The fraction collector arm was stowed to prevent damage
during shipping. The arm stowing bracket should be removed
at this time.
1. Loosen the bracket's two thumbscrews along the sides of
the arm (Figure 3-1).
Thumbscrew
Figure 3-1 Remove arm stowing bracket and spacer
2. Push the arm to the left or right remove the spacer.
3. Store the bracket and spacer. These parts should be
reinstalled if the system needs to be shipped again.
3-2
WARNING
Spacer
Thumbscrew