Teledyne CombiFlash Rf User Manual page 21

Dimensions (H x W x D)
Flow Rate Range
Pressure Limit
UV and UV- Vis
Detection
ELSD Detection
Mass Spectrometry
Detection
SIM Sensitivity
Number of Solvents
Programmable
Gradients
Sample Injection
User Interface
Software
Fraction Collector
Note 1. All specifications are subject to change.
Table 1-4 CombiFlash Rf + 4x System
Module Dimensions
Module Weight
Overall Dimensions
Overall Weight
Table 1-3 CombiFlash Rf + PurIon
System Specifications
CombiFlash Rf: 24 x 14 x 17 in (60 x 36 x 43 cm)
Mass Spectrometer 26 x 11 x 22 in (66 x 28 x 56 cm)
Roughing Pump 10 x 9 x 18 in (26 x 23 x 46 cm)
1 - 200 mL/min
200 psi (13.8 bar)
Variable UV 200 - 400 nm standard. Variable UV-Vis
200 - 800 nm option
Option that can be combined with either UV or UV-Vis
50 – 1200 Dalton, 1 Dalton Resolution
Electrospray Ionization (ESI) or optional Atmospheric
Pressure Chemical Ionization (APCI)
Positive or Negative Ionization Mode
10 pg Reserpine, 100:1 S/N (RMS) with SIM of m/z
Binary gradient with any two of four solvents; A third
solvent can be used to add modifier at a fixed
percentage.
Linear, step, isocratic
Direct
10.4" touchscreen
PeakTrak
Internal
Specifications
61 cm (24")21.6 cm (8.5")43.2 cm (17") (HWD)
13.6 kg (30 lbs)
61 cm (24")57.6 cm (22.6")43 cm (17") (HWD)
40.8 kg (90 lbs)
Section 1 Introduction
1
1
1-13