Windows Xp Settings - Teledyne CombiFlash Rf User Manual

7.2.3 Windows XP Settings

1. From the Windows Start button, open the Control Panel.
2. Locate the Network Connection icon and open this control
panel.
3. Highlight the "LAN or High-speed Internet Connection"
icon. Select the "Change settings of this connection" option,
or right-click and select "Properties." Refer to Figure 7-3.
4. Highlight the "Internet Protocol (TCP/IP)" item in the list,
and click on the "Properties" button. Refer to Figure 7-4.
5. Select the Alternate Configuration tab. Click the "User
Configured" option. See Figure 7-5.
6. Enter the IP address "192.168.1.200".
7. Enter the Subnet Mask, "255.255.255.0."
8. Click the OK button to close the Internet Protocol
properties window. Click the Close button to close the Local
Area Connection properties window.
9. Shut down the PC and place the CombiFlash Rf system in
Standby.
Figure 7-3 LAN or High-speed Internet Connection
Section 7 Remote Interfaces
7-9