Preparation: Optional 4X Module; Unpacking The Unit - Teledyne CombiFlash Rf User Manual

This section provides instructions for unpacking and installing
the CombiFlash Rf 4x module after completing the
CombiFlash Rf
To prepare the system for operation, sequentially follow all
instructions in sections 4.1 through 4.10.
Note
Section 4.12 contains an Installation Qualification checklist. If
required, sign off the checklist entries as you successfully
complete the following sections.
Note
The optional 4x module is not compatible with the CombiFlash
Rf 75 system.

4.1 Unpacking the Unit

The CombiFlash Rf 4x module is shipped in a single carton.
Carefully unpack the shipment and inspect the contents. If
there is any damage to the shipping carton or any components,
contact the shipping agent and Teledyne Isco (or its
authorized representative) immediately.
If there is any evidence that the system has been damaged in
shipping, do not plug it into AC power. Contact Teledyne Isco
or its authorized representative for advice.
Compare the contents of the boxes with the enclosed packing
slips. If there are any shortages, contact Teledyne Isco
immediately.
CombiFlash
Section 4 Preparation:
Optional 4x Module
+ +
or Rf Lumen system installation (Section 2).
WARNING
User Manual
+
® Rf
4-1