Configuration - Teledyne CombiFlash Rf User Manual

+
CombiFlash® Rf User Manual
The window also includes controls to air purge Rf+ systems,
including those equipped with 4x:
• Air Purge Cartridge – Click this button to pump
compressed air or external gas through the solid sample
cartridge.
• Air Purge Column – Click this button to pump
compressed air or external gas through the column.
• Stop – Click this button to stop the air purge. This
button is only active while purging.
The right half of the window displays the raw lamp energy.
Click the Close Manual Control button to close the window.
See Also: M

6.3.13 Configuration

The Configuration window allows you to define the operating
characteristics of your CombiFlash Rf system. It also allows
you to configure the system for network connections for remote
access and printing. Open the Configuration window by
selecting the T
command.
The configuration window displays three tabs: I
C
ONFIGURATION [6.3.13.1]
and U
SER
6.3.13.1 Instrument Configuration
Solvent Controls
• Solvents 1 through 4 — From the list of solvents,
specify the solvent connected to the each port of the
system.
• Add Solvent button — Click this button to enter a
solvent name. The system can store up to 16 solvent
names. For assistance in selecting appropriate solvents,
see the S
• Remove Solvent button — Click this button to open a
list of all entered solvent names. Select the names you
want to remove and then click the OK button.
6-36
C
ANUAL ONTROL OF THE
>M
OOLS ANUAL
, N
P
REFERENCES [6.3.13.3]
S
OLVENT ELECTION [
C
OMBI
C
ONTROL [6.2.4.2]
C
ETWORK ONFIGURATION [6.3.13.2]
.
table.
- ]
ON LINE
F R
LASH F [6.4.11]
menu
NSTRUMENT
,