Single Bottle Configuration - Teledyne Platinum Pocket Manual

Platinum/Optima CVE Refrigerated Sampler
Figure 2-4 Bottle rack and 12-2.5 liter

2.4.4 Single Bottle Configuration

If your sampler is configured for composite
sampling simply place the discharge tube in the
center of the sample bottle.
Composite Bottle Installation
1. Install the discharge tube (if needed).
Remove bottle cap and position the bottle
under the discharge tube.
Note
Make sure the discharge does not contact the bottle in
any way.
2. Go to B
C
OMPOSITE
2-12
O t. in the menu and select
OTTLE P
and then select your bottle size.