Table of Contents
Advertisement
CombiFlash NextGen Systems
Section 4 Network Configuration
4.1 Network
Configurations
EAR99 Technology Technology Subject to Restrictions Contained on the Cover Page
Note
The procedures described in this section will require assis-
tance from your network administrator. Contact your Informa-
tion Technology department before proceeding.
The system has a factory-assigned IP address —192.168.1.51. In
many cases, this address must be reconfigured for use on a cor-
porate network. To reconfigure the IP address:
1. From the touch screen panel, select the T
menu command.
RATION
2. Select the N
ETWORK
3. Select Static IP as the N
Note
The CombiFlash NextGen system also provides limited support
for DHCP connections. If DHCP is desired, select DHCP as the
network type and skip steps 4 through 7. The system will dis-
play instructions required to complete a DHCP connection.
4. Enter the IP Address, Netmask, and Gateway information
provided by your network administrator.
Note
Should your network administrator request the MAC address, it
can be found in the H
5. Click the O
button to save the settings.
K
6. Confirm that your network administrator has completed
any necessary network changes to support the system.
7. Locate the CAT5 connection cable (P/N 480-6545-01) in the
accessory package. Insert one end into the Ethernet port
on the back panel. Connect the other end of the cable to
your network access port.
You should be able to connect to the CombiFlash NextGen
system from a PC on the network (Section 4.1.1) and configure
other network features such as network printing (Section 4.1.2)
and network file saving (Section 4.1.3). Networks with Wi-Fi
access points may also support remote control with mobile
digital devices.
C
tab.
ONFIGURATION
T
.
ETWORK
YPE
> A
P
T
ELP
BOUT
EAK
RAK
> C
-
OOLS
ONFIGU
window.
4-1
Advertisement
Table of Contents
