Vap Wds Only (Access Point) - Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
See also
vap broadcast ssid (access point) (Page 188)
6.1.6.5

vap wds only (access point)

Description
With this command, you specify that the access point only supports communication via
WDS.
Note
This command is available only in access point mode.
Requirement
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
cli (config-if-vapX-0-Y)#
Syntax
Call the command without parameter assignment:
vap wds only
Result
You have specified who the VAP interface connects to.
Further notes
You display the setting with the
You disable the function with the
See also
no vap wds only (access point) (Page 191)
190
show wlan vap <vap X 0/Y>
command (default setting).
no vap wds only
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
command.