Option Value-String - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Network protocols
7.3 DHCP server
Further notes
You display the setting with the
You disable the IPv4 address band with the
You delete the DHCP option with the
7.3.4.5
option value-string
Note
The command is only available when the following requirements are met:
• SCALANCE W722-1 RJ-45 (MLFB 6GK5722-1FC00-0AA0 and 6GK5722-1FC00-0AB0
(US version))
• The IPv4 address band is not enabled.
Description
With this command you configure the DHCP option 67 and the name of the boot file as
DHCP parameter. The DHCP option 67 is created automatically when the IPv4 address
band is created.
Requirement
You are in the DHCPPOOL configuration mode.
The command prompt is as follows:
cli(config-dhcp-pool-<ID>)#
Syntax
Call up the command with the following parameters:
option <option-code> value-string <dhcp-param>
The parameters have the following meaning:
Parameter
option-code
dhcp-param
Result
The DHCP option 67 is configured.
294
show ip dhcp-server-pools
no option
Description
Code of the DHCP option
Name of the boot file
command.
command.
no pool-enable
command.
Range of values / note
67 - Boot file name
-
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Advertisement
Table of Contents
