Wlan Security Edit Key - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
10.2.5.9
wlan security edit key
Description
With this command, you add a WEP or AES key to the key table. You can choose between
several key lengths.
● 5 or 13 ASCII or 10 or 26 hexadecimal characters specify a weaker key (40/104 bits).
● 16 ASCII or 32 hexadecimal characters, on the other hand, define a strong key (128 bits).
Note
iPCF or iPCF-MC mode activated
If you want encryption with AES in iPCF or iPCF-MC mode, only keys with a 128 bit key
length are supported.
Requirement
You are in the Interface configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan security edit key <index(1-4)> <key>
The parameters have the following meaning:
Parameter
index
key
Result
The WEP or AES key is inserted in the key table.
Further notes
You display the settings with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
Index of the key table
Key
show wlan security <wlan 0/X>
Security and authentication
10.2 WLAN
Values or range of values
1...4
Enter the WEP or AES key.
command.
383
Advertisement
Table of Contents
