Wlan Frequency Band (Client) - Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan frequency band { 2.4 | 5 }
The parameters have the following meaning:
Parameter
2.4
5
Result
The frequency band for the WLAN interface is specified.
Further notes
You display the setting with the
6.1.5.38

wlan frequency band (client)

Description
With this command, you specify the frequency band for the WLAN interface.
Note
This command is only available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
174
Description
Frequency band 2.4 GHz
Frequency band 5.2 (4.9; 5.6; 5.8) GHz
show wlan basic <wlan 0/X>
Default setting
WLAN1: 2.4 GHz
command.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03