Show Ssl Server-Cert; Arp; Show Ip Arp - Siemens SCALANCE W760 Configuration Manual

Network protocols

7.8 ARP

7.7.2

show ssl server-cert

Description
This command shows the SSL server certificate.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ssl server-cert
Result
The SSL server certificate is displayed.
7.8 ARP
This section describes commands of the Address Resolution Protocol (ARP).
7.8.1

show ip arp

Description
With this command, you display the IP ARP table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
340
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03