Wlan Security Ap-Radius-Authenticator Reauth-Interval - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
Security and authentication
10.2 WLAN
Syntax
Call up the command with the following parameters:
no wlan security ap-radius-authenticator primary <index (1-2)>
The parameter has the following meaning:
Parameters
index
Result
The primary server is disabled.
Further notes
You enable the setting with the
You display the setting with the
See also
wlan security ap-radius-authenticator primary (Page 368)
show wlan security ap-radius-authenticator (Access Point) (Page 361)
10.2.4.8
wlan security ap-radius-authenticator reauth-interval
Description
With this command, you configure the lifetime of the authentication (in seconds).
Note
This command is available only in access point mode.
Requirement
● Local time management is active.
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
370
Description
Index of the RADIUS server
wlan security ap-radius-authenticator primary
show wlan security ap-radius-authenticator
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Values or range of values
1...2
Configuration Manual, 11/2014, C79000-G8976-C351-03
command.
command.
Advertisement
Table of Contents
