Show Fault Counter; Show Logbook - Siemens SCALANCE W760 Configuration Manual

11.1.6

show fault counter

Description
This command shows the number of fault transitions of the power supply and network
connections.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show events fault counter
Result
The number of indicated faults is displayed.
11.1.7

show logbook

Description
With this command, you display the content of the logbook.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
or
cli#
or
cli#
Diagnostics
11.1 Diagnostics
407