Vap Security Wpa-Group-Key-Update-Interval (Access Point) - Siemens SCALANCE W760 Configuration Manual
Industrial wireless lan
Hide thumbs
Also See for SCALANCE W760:
- Configuration manual (464 pages) ,
- Operating instructions manual (50 pages) ,
- Operating instructions manual (51 pages)
Table of Contents
Advertisement
10.2.6.6
vap security wpa-group-key-update-interval (Access Point)
Description
With this command you specify the time after which the key is renewed.
Note
This command is available only in access point mode.
Requirement
You are in the Interface Configuration mode of the VAP interface.
The command prompt is as follows:
cli (config-if-vapX-0-Y)#
Syntax
Call up the command with the following parameters:
vap security wpa-group-key-update-interval {0|seconds (30-36000)}
The parameter has the following meaning:
Parameter
0
seconds
Result
The time for renewal of the key is specified.
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 11/2014, C79000-G8976-C351-03
Description
The key will not be renewed.
When the time expires (second),
the key is renewed.
Security and authentication
10.2 WLAN
Values or range of values
-
30 ... 36000
393
Advertisement
Table of Contents
