Wlan Allowed Channels Only - Siemens SCALANCE W760 Configuration Manual

Network structures
6.1 WLAN
Parameters
5
channels
Result
The list of permitted channels has been created.
Further notes
You display the list of valid channels with the
command.
The "Allowed channels only" function is activated by the "
command.
See also
wlan allowed channels only (Page 142)
6.1.5.2

wlan allowed channels only

Description
With this command, you enable the "
you specified with the
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call the command without parameter assignment:
wlan allowed channels only
142
Description
Optional parameter. Use this parameter to specify the frequency band
from which you want to add one or more channels to the list.
Number of permitted channels.
To specify in more than one channel, write the channel numbers in quotes
and use the <space> as the delimiter.
Example:
wlan allowed channels list 5 "40 36"
If you do not use the "
overwritten.
Use allowed channels only
wlan allowed channels list
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
" parameter, the existing entries in the list are
add
show wlan allowed channels <wlan 0/X>
wlan allowed channels only
" function. Only the channels
command are used.
Configuration Manual, 11/2014, C79000-G8976-C351-03
"